Ram Mount Store

RAM ROD® JR Fishing Rod Holder with 2" Spline PostThe RAM ROD® Jr Fishing Rod Holder, compatible with both spinning and casting reels, is specifically designed for light-duty environments and smaller fishing rods. It features a flexible latching strap to secure the rod. A...

EZ-Roll'r Cradle for Apple iPad Mini 4The RAM® EZ-Roll'r cradle for the Apple iPad mini 4 is the most cost effective and simple way to secure the iPad mini 4 in a variety of applications. The RAM-HOL-AP20U consists of a high strength composite cradle...

RAM Stainless Steel U-Bolt Base w/1" BallThe RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail. The rust proof metal u-bolt accommodates rails in diameter from 1" to 1.25" in diameter. The base also...

No-Drill™ Laptop Base f/'17-20 Ford F-Series + More The RAM No-Drill™ laptop mounting base for the 2015 Ford F-150 features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the front bench or passenger side seat rail bolts as attachment...

RAM Double Swing Arm with 8" Male Tele-Pole™, 9" Female Tele-Pole™ & 2.5" Round Base (AMPs Hole Pattern)DescriptionThe RAM RAM-VP-SW1-89, combination swing arm/tele-pole system, will connect to any RAM vehicle base without a welded female tele-pole. Included is a tele-pole with a height range...

RAM® Universal Adapt-A-Post™ Track Base The RAM® Universal Adapt-A-Post™ Base is the revolutionary answer to combine compatibility across post and spline systems from RAM® Mounts, Scotty, Fish-On, Railblaza, Cannon, Brocraft, Cabela's, and Bass Pro Shops. This version of the RAM® Universal Adapt-A-Post™ is a track...

The RAM-D-111U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one 3-3/4" diameter round base with 2.25" rubber ball and flat 11" x 3" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to...

RAM® No-Drill™ Vehicle Base for '20-21 Ford ExplorerRAM® No-Drill™ mounting base for the 2020 Ford Explorer offers low-profile mounting; telescoping pole allows for height adjustments. The RAM® No-Drill™ laptop mounting base features a stabilizer foot and heavy-duty steel base custom-designed to fit the 2020-2021...

Steel Adhesive Plate Adapter for Magnetic Mounts This round steel adhesive plate is an ideal solution for enabling any RAM® magnetic base – eliminating the need to drill into a vehicle’s dash or other flat surfaces. Featuring adhesive that attaches to most flat surfaces, the...

Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with C Size 1.5" BallThe RAM® Torque™ handlebar and rail mounting base has a 1.5” rubber ball and accommodates bars 3/4” to 1” in diameter. Sizing inserts are included to provide a snug fit and protection of...

X-Grip® Post Caps - 4-PackThe RAP-UN-CAP-4U consists of (4 qty) post caps that are an accessory for all RAM X-Grip® cradles and mounts.

RAM 14" Long Extension Pole with 1" and 1.5" Single Open SocketsThe RAP-CB-201-14U consists of a SHORT extension pole and 1" and 1.5" ball single open sockets. The socket ends can swivel 360 degrees; this allowing for you to rotate your camera adapter in...

The RAP-111BU consists of a 1.5" diameter rubber ball connected at right angles to a flat 6.25 x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios,...

RAM® X-Grip® Large Phone Mount with RAM® Tough-Strap™ Handlebar BaseThe RAM® Tough-Strap™ is the lowest-profile rugged mounting solution for any bike or motorcycle handlebars. With two different size straps, easily install the RAM® Tough-Strap™ on any mountain bike, road bike, or e-bike with a...

The RAP-202U-225 consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material:High Strength Composite Ball Size: 1.5" Rubber Ball Size

Tough-Ball™ with 1/4"-20 x .50" Threaded Stud The RAP-B-379U-252050 consists of a 1" diameter rubber ball, connected to a 1/4"-20 X .50" male threaded post. The male thread matches most standard camera and camcorder female threads found on the bottom of the camera. U.S. Standard Thread...

No-Drill Laptop Base for the Ford Explorer and Police Interceptor UtilityCompatible Vehicles:Ford Explorer (2011-2012)Ford Police Interceptor Utility (2013)Placement of Mount:Passenger side floor board, in front of seatDrilling Requirements:No - attaches to seat studsSeat Configuration:BucketPole:Purchased SeparatelyMaterial:Powder Coated SteelNotes:Utilizes existing vehicle hardware. Plastic trim may be...

RAM Double Swing Arm w/8" Male & No Female Tele-PoleSwing Arm connects to No Ball Base.Material: Powder Coated SteelColor: Black Powder Coat

Tough-Claw Mount w/Universal X-Grip Phone HolderThe RAM-HOL-UN7-400U consists of the small Tough-Claw base and universal X-Grip holder. The X-Grip holder has a clean and clever four leg design that sports great holding power without hiding your smart-phone behind foam pads and plastic. The X-Grip...

RAM 12" Long Double Swing Arm with Open Swivel Single SocketThe RAM-VB-110-4U consists of two 6" long single swing arms, Tele-Pole connection hole and swivel single socket that will accommodate 1.5" ball bases. The two swing arms connect with a bolt and knob system....