Ram Mount Store

RAM 2.5" Round Base (AMPs Hole Pattern), 1.5" Ball & 1/4"-20 Threaded Male Post for CamerasThe RAM camera base contains a 1.5" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 1/4"-20 threaded steel stud, centered, the round...

RAM® No-Drill™ Laptop Mount for '19-26 Ram 1500 Pickup Trucks (5th Gen)The RAM® No-Drill™ Laptop Mount for '19-26 Ram 1500 Pickup Trucks (5th Gen) (RAM-VB-186ST1-SW3) installs quickly and easily to the passenger seat rails using the existing vehicle hardware. This laptop mounting kit is...

RAM® EZ-Roll'r™ Cradle with Ball for Apple iPad mini (A17 Pro) & mini 6The RAM® EZ-Roll’r™ cradle for iPad mini (A17 Pro) & mini 6 with 1" ball secures your device in a form-fit holder while keeping the entire screen visible. The cradle includes...

RAM® No-Drill™ Laptop Base for '05-25 Nissan Frontier + MoreThe RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom-designed to fit this vehicle perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the...

RAM® No-Drill™ Laptop Mount for '05-25 Nissan Frontier + MoreThis No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature with upper and lower poles that...

RAM® No-Drill™ Vehicle Base for '20-22 Ford Police Interceptor Utility The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base with a universal design to fit the 2020-2022 Ford Police Interceptor Utility. Using the passenger side seat rail bolts as attachment points, existing...

RAM® EZ-Roll'r™ Cradle for Apple iPad mini 6The RAM® EZ-Roll’r™ cradle for the iPad mini 6 secures your device in a form-fit holder while keeping the entire screen visible. Simply slide your iPad into the cradle and roll the top clip over the device...

RAM® Printer Cradle for Brother PocketJet 7 Series, 6/6 Plus & 673The RAM-VPR-101 is designed to hold Brother® PocketJet® Series portable printers. A custom-fit enclosure, the cradle is form-fitting with no sharp edges and adds little to the overall size of the printer. Key...

Twist-Lock Triple Suction Cup Ball BaseThe RAP-B-365-224-1U, triple suction cup base, consists of a 1" ball base connected to a high strength composite base with three 3.3" diameter suction cup bases at each end. This base has a suction grip, allowing for the connection...

RAM Flat Surface Mount® with Long Double Socket Arm & Universal X-Grip® III Holder For Large TabletsThe RAM-B-101-C-UN9U consists of (2 QTY) 2.5" diameter round bases with the universal AMPS hole pattern, LONG double socket arm and universal X-Grip® III clamping cradle for 10"...

RAM 2.25" Ball Mount w/ Long Double Socket Arm, 11" x 3" Rectangle Base, and 3.68" Round BaseThe RAM-D-111U-E consists of a long length double socket arm, 3.68" diameter round base and 11" x 3" rectangular base. The round base contains pre-drilled holes, including...

Universal X-Grip® Holder w/1" Ball BaseThe RAM-B-202-UN9U consists of a composite spring loaded cradle, expandable grip arms, additional bottom support keepers and 1" ball base adapter. Included are extra easy access grip knobs, located on the back of the cradle for quick release of...

Triple Suction Cup Base with AMPs Hole Pattern without BallThe RAP-365-224-1BU consists of a triple 3.3" twist lock suction cup base with plate that contains the universal AMPs hole pattern. The suction cup is designed to have an extra strong hold on any smooth...

RAM Large Tough-Claw with 1" Diameter Rubber BallThe RAM Tough-Claw is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw can be clamped on rails from 1" to 2.25" outer diameter....

RAM Large Tough-Claw with 1.5" Diameter Rubber BallThe RAM Tough-Claw is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw can be clamped on rails from 1" to 2.25" outer diameter....

Twist-Lock™ Suction Cup Mount w/Universal X-Grip® Cradle for 10" Large TabletsThe RAM-B-166-UN9U consists of a 3.3" diameter suction cup twist lock base, double socket arm, round base adapter and universal X-Grip® clamping cradle for 10" tablets. The suction cup base is designed to have...

RAM 6.25" x 2" Universal Electronics Base with 1.5" BallThe RAM-111BU consists of a 1.5" diameter rubber ball connected at right angles to a flat 6.25 x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many...

Handlebar Rail Mount with Zinc Coated U-Bolt Base and Universal X-Grip® Cradle for 10" Large TabletsThe RAM-B-149Z-UN9U consists of a zinc coated u-bolt base, double socket arm, round base adapter and universal X-Grip® clamping cradle for 10" tablets. Included in this package is hardware...

RAM® No-Drill™ Vehicle Base for '19 Chevy Silverado 1500 & GMC 1500The RAM® No-Drill™ laptop mounting base features a stabilizer foot and heavy-duty steel base custom-designed to fit the 2019 Chevrolet All-New Silverado and GMC Next Generation Sierra perfectly. Using the passenger side seat...

RAM-Rod Light-Speed holder with flush base, is a must have for the fishing enthusiast. Designed to mount onto a horizontal surface in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. Additional...