Ram Mount Store - Marine Electronics Mounts

RAM 2.25" Ball Mount w/ Long Double Socket Arm, 11" x 3" Rectangle Base, and 3.68" Round BaseThe RAM-D-111U-E consists of a long length double socket arm, 3.68" diameter round base and 11" x 3" rectangular base. The round base contains pre-drilled holes, including...

Double 6" Swing Arm with 6.25" x 2" Rectangle Base and Horizontal Mounting BaseThe RAM double swing arm mount includes two 6" long BENT swing arms mounted on a horizontal surface mounting base. At the device mounting end of the mount is a rectangular...

Fishfinder Mount for Lowrance Hook2 Series - 1" Track MountDesigned for light duty fresh water use, this B size (1”) Track Ball™ kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the...

1" Ball Mount with 6.25" X 2" Rectangle Base & Diamond BaseThe RAM-B-111-238U consists of a double socket arm, 2.43" x 1.31" diamond base and 6.25" x 2" rectangle base. The diamond base contains two holes 1.912" from center to center, positioned at both...

RAM® Marine Electronics Ball AdapterThe RAM-D-115BU, a universal mounting plate, consists of a 2.25" diameter rubber ball, connected at right angles to a flat 6.25" x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic...

Universal D Size Ball Mount with Short Arm and Hi-Torq™ Wrench for 9"-12" Fishfinders and ChartplottersThe RAM-D-115-C-KNOB9H consists of a base with a 2.25” diameter D size ball, a short arm, a Hi-Torq™wrench and a 6.25” x 2” marine electronic plate with a D...

RAM Mount 2.25" Ball Mount with 3.68" Round Base & 2" x 5" Rectangular Base for Humminbird HELIX 9, 10 & 12The RAM-D-202-25-C-202, powder coated marine grade aluminum mount, consists of a double socket arm, one round 3.68" diameter round base and one 2"...

Ram Mixed Combination Pin-Lock™ Security Knob, Stud and Key Knob f/ Gimbal BracketsThe RAM® Gimbal Security Knob is a great solution for securing your gimbal mounted electronics, whether or not it's mounted on a RAM®. The universal design utilizes various stud sizes to accommodate...

RAM Composite 1" Ball Mount with 6.25" X 2" Rectangular Plate & Track Ball™ BaseThe RAP-B-111B-354-TRA1U consists of a Track Ball™ base, composite double socket arm and 6.25" x 2" rectangle plate. The 6.25" x 2" rectangle plate contains different combinations of pre-drilled holes...

RAM 2.5" Round Base with the AMPs Hole Pattern, 1" Ball & Hardware for the Garmin echo™ 100, 150 & 300cThe RAM-B-202-G4U consists of a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal...

RAM 1" Ball Marine Electronic "LIGHT USE" Mount for the Garmin echo™ 100, 150 & 300cThe RAM-B-101-G4 consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and round adapter base that attaches directly to the back of...

RAM 1.5" Diameter Ball Mount with 6.25" X 2" Rectangle Base, STANDARD LENGTH Double Socket Arm & 2.5" Round Base The RAM-111U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one 2.5" diameter round base with 1.5" rubber ball...

Universal D Size Ball Mount with Long Arm for 9"-12" Fishfinders and ChartplottersThe RAM-D-115-E consists of a base with a 2.25” diameter D size ball, a long arm and a 6.25” x 2” marine electronic plate with a D size ball for supporting larger...

11" x 3" Rectangle Universal Electronics Base with 2.25" BallThe RAM-D-111BU, universal mounting plate, consists of a 2.25" diameter rubber ball, connected at right angles to a flat 11" x 3" rectangular plate. The plate contains different combinations of pre-drilled holes which will match...

RAM Transducer Arm Mount with Open Single Socket: Compatible with all RAM 1" Ball BasesKayak fishing is all about adaptability. RAM Mount offers the widest selection of kayak fishing accessories to adapt to a wide range of fishing scenarios. RAM now offers a deployable...

Universal D Size Ball Mount with Short Arm for 9"-12" Fishfinders and ChartplottersThe RAM-D-115-C consists of a base with a 2.25” diameter D size ball, a short arm and a 6.25” x 2” marine electronic plate with a D size ball for supporting larger...

The RAM-D-111U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one 3-3/4" diameter round base with 2.25" rubber ball and flat 11" x 3" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to...

B Size 1" Fishfinder Ball Adapter for the Lowrance Hook2 SeriesDesigned for light duty use, this B size (1”) ball base kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included...

RAM® Heavy Duty Fishfinder Deck MountThe RAM® Heavy Duty Fishfinder Deck Mount (RAM-FF1U) is a robust, powder-coated aluminum bracket designed to support up to three fishfinders simultaneously. Whether you're trolling deep waters or scanning shallow coves, this heavy-duty mount helps you take in more...

RAM® Ball Adapter with 1/4" - 20" Threaded Hole and Hex Post - C SizeThe RAM-337U includes a 1/4"-20 female thread hex hole connected to a 1.5" rubber ball.Specifications: Thread Pitch (inch): 1/4"-20 x 1/2" (female) Ball Size (inch): C Size (1.5") Materials: Marine-grade...