Sailing - Rigging

Single Swivel Gate Eye for 1/8" WireA single eye is used on one end of the gate area to attach the gate hook.

Deck Toggle "T" Style for 3/16" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead.

Single Swivel Gate Eye for 3/16" WireA single eye is used on one end of the gate area to attach the gate hook.

"T" Style Toggle Jaw for 3/16" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

Open Body Jaw to Swage Turnbuckle for 1/8" WireClassic, traditional design. Forged silicon bronze body with T-316 stainless ends.Specifications: 1/8" Wire 1/4" Pin 3" adj.

Short Adjuster for 1/8" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications: 1/8" Wire 1/4" Pin 1" adj.

Lever Arm Crimper ToolC. Sherman Johnson Hand Crimp Fittings have proven themselves over the years, however the overall integrity of the system depends on the proper tools for the job. The tools are designed with special width and relief patterns which apply to Johnson...

Jaw/Jaw Tubular Turnbuckle T-Style 3/8-24 ThreadFor those who prefer a traditional body turnbuckle. The forged silicon bronze body, coupled with our integral toggle jaw, provides positive locking and ease of adjustment.Forged silicon bronze bodies with 316 stainless ends offer a great non-galling combination. Integral...

Alu Foam Soft Grip Tiller Extension - 800mmThe aluminum Soft Grip Tiller Extension is a specially designed textured grip for secure handling and comfort during prolonged use.Features: Manufactured from anodized aluminum Soft butt-end option Quick Guide (pdf)

Carbon Fiber Tiller Extension - 1MFeatures the latest in uni-directional 16mm carbon fiber tube which incorporates an additional pull wound spiral layer for optimum strength, making it stronger than conventional carbon fiber tube, and with our custom-designed foam grip handle to reduce fatigue during...

Stanchion BullseyeBarton's Stanchion Mount Bullseye is ideal for use with furling lines in place of a block. The simple-to-fit mount features a large nylon bullseye with a 17 mm opening.

Alu Foam Soft Grip Tiller Extension - 700mmThe aluminum Soft Grip Tiller Extension is a specially designed textured grip for secure handling and comfort during prolonged use.Features: Manufactured from anodized aluminum Soft butt-end option Quick Guide (pdf)

High Load Eye 22mm BoreErgonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep friction as low as possible. The range has amazing strength-to-weight ratios, making...

High Load Eye 16mm BoreErgonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep friction as low as possible. The range has amazing strength-to-weight ratios, making...

Interlocking Swivel Gate Eye for 1/8" WireAn interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate.

Deck Toggle Turnbuckle to Hand Crimp Terminal for 1/8" WireThis "T" bolt style fitting is used on decks or bulkheads. T-316 stainlessSpecifications: 1/8" Wire 1/4"-28 3" adj.

Snap Gate Hook - Body Only - 1/4" - 28 Left HandFor those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end of body to inside bearing point of hook. Specifications:1/4"-28 LH

Splice Eye to Splice Eye Fitting*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on...

Over Center Snap Gate Hook for 1/8" WireThe over center design has no load on the swinging hook when closed. This feature allows easy opening, yet stays secure with a heavy split ring on the plunger latching devise. Investment Cast T-316 Stainless. Specifications: 1/8" Wire...

Eye to Jaw FittingThis fitting will convert a small bail at the stern rail to the standard gate eye to accept the over center gate hook.