Boat Outfitting - Radar/TV Mounts

Gen 3 Standard Starlink Antenna Mount with 8 Degree Wedge Base - BlackThe Seaview SRM200WB8 Mount for the Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) has been specifically designed for the harsh marine environment. If it's good for the marine environment,...

APT-F-150-02 Aluminum PowerTower® Radar Mount - 6" Forward LeaningThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength...

Starlink High Performance 16" Pedestal Mount with ADASTLKA Starlink Top PlateSeaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV. Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean...

6" Aluminum PowerTower Mount for StarlinkEngineered for Starlink Flat High-Performance 150mm (6”) high and constructed from the best marine-grade aluminum, designed to fit Starlink's Flat High-Performance Model.Install your Starlink with precision on the roof, T-top, flybridge, or radar arch of your powerboat. It guarantees obstacle...

Starlink High Performance 5" Pedestal Mount with ADASTLKA Starlink Top PlateSeaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV. Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean...

5" Modular Mount AFT Raked 7" x 7" Base Plate - Top Plate RequiredThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making...

Modular Plate for Most Closed Dome and Open Array RadarsSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is...

LTB Top Universal for Mounting Your Light/GPSThe LTB-U1A is a Universal Light Bar Top for mounting your own light and or GPS. Specifications: Type: Light/GPS Brackets Box Dimensions: 5"H x 8"W x 8"L WT: 1 lbs UPC: 839662009539 Quick Guide (pdf)

Radome Plate 1 for Raymarine, Garmin, B&G, Lowrance DomesThe modular Dual PowerTower has been designed to allow your open array. radar, satdome and camera to be mounted together in one single space saving modular installation. Features:Radome plate 1 (Raymarine, Garmin, B&G, Simrad and Lowrance radomes)...

Starlink Mini Quick Release Base Mount for Single Location UseExperience seamless installation and removal with our Starlink Mini Quick-Release Removable Base Kit. Simply pull the black knob to effortlessly mount or detach your Starlink Mini—no tools necessary. Built tough with anodized 6061 aluminum and...

PM-W6-7This 6° wedge goes between your Seaview mount and mounting surface. The base of the wedge is 7"x7" and is made from machined King Starboard . Utilize wedges to compensate for deck angle or planning attitude of the boat.Features Pre-drilled mounting holes allow for...

StarPod Mini System with StarTower for Starlink Mini Dish (11.75 x 10.2″ Dish Size) *Starlink Dish Not IncludedStarPod Systems are designed to provide a strong, sturdy, and attractive mounting solution for Starlink on board boats with a hardtop, radar arch, or other flat mounting...

1-1/4" Black Light Bar for 20" or Smaller Satdomes - Folds Over 90° - Must Pick LTB TopSeaview light bars are made from aluminum and powder-coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars are also available). These light...

ADAF2 Black Modular Top Plate for FLIR M100 or M200 Series Cameras for Use with Mounts Ending in M1 or M2This Seaview top plate is for FLIR M100 or M200 thermal cameras. This one-piece design gives the top plate a nice clean look and...

1-1/4" Light Bar for Closed Dome Radar Stainless Steel - Must Get LTB TopSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25" in...

Light Bar for M100 & M200 FLIR for M2 Mounts Only - Must Pick LTB TopA 2” diameter Light Bar designed to work with FLIR M100/M200 Series. Contact Seaview directly to make sure this light bar is right for your boat. Not intended for...

Starlink Maritime Black Top Plate for Seaview M1 & M2 Style Modular MountsSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "Swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates...

APT-150-02 - Aluminum PowerTower® Radar Mount - 6" Aft LeaningThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled...

RW41 4 Degree Direct Mount Wedge for Furuno DRS4DL (15"-20" Radar) & 18" Koden/SitexImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as...

1-1/4" Black Light Bar for FLIR & Searchlights - Folds Over 90° - Must Pick LTB TopSeaview light bars are made from aluminum and powder-coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars are also available). These light bars...