Sailing

Deck Eye - Stainless Steel - 14mmStainless steel deck eyes with generous eye capacity.Specifications: Stainless Steel Deck Eye Single 14mm Height x 14mm Width x 5mm Fastenings

Deck Plate with Fixing & Eye with Blanking Plug - M12 EyeTurned from solid bar 316 stainless steel with a highly polished finish, the deck plates have a centre anchoring hole in three standard metric thread sizes – M8, M10, and M12, each supplied...

4mm Rope Stoppers - Black - PairRope Stoppers can also be referred to as parrel beads, tie balls, halyard stoppers, or stopper balls, and are primarily used in rope management.At the end of a line, Rope Stoppers serves as an easy-to-grab end knob, can...

Large Snatch Block for Yachts Up to 40' (12.2M) - Stainless Steel SnapBarton Snatch Blocks give the crew the option to locate the block anywhere on deck using the stainless steel snap shackle, then locate a rope into the sheave without the need to...

Deck Organizer Size 1 - 3 SheaveDesigned for use when leading control lines and halyards across the coach roof and back to the cockpit.This range features aluminum construction with a grey or black anodized finish. Sheaves are from molded Acetal with hollow stainless rivets...

Genoa Slide Car (25mm)Designed with a heavy-duty stainless steel attachment loop, through-bolted and riveted for extra strength. These units will accept most Barton blocks.Plain bearing genoa cars, sliders, and spinnaker pole slides.A popular range of Genoa cars and sliders designed to run on 25mm...

Deck Plate with Fixing & Eye with Blanking Plug - M8 EyeTurned from solid bar 316 stainless steel with a highly polished finish, the deck plates have a centre anchoring hole in three standard metric thread sizes – M8, M10, and M12, each supplied...

Size 3 45mm Plain Bearing Pulley Block Double Upright BlockThe size 3 Barton plain bearing blocks have 45mm (1 3/4" sheave size 3 block range incorporates modern design with stainless steel frames and the latest advanced materials, using 30% fibre glass filled nylon and...

Series 7 Stand Up Ball Bearing Swivel Block - 2-3/8" 60mmSingle stand up ball bearing block. Stand up spring keeps block upright when not in use. Stainless steel base spreads load out and may be used with 97-49 backing plate. (sold separately) Delrin(tm) ball...

Splice Eye with Threaded Stud: 1/4"-28 x 2-1/2" RH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line...

Spreader Flag Halyard KitIncludes 40ft. of polyester line, block with bail and shroud cleat.

Stand-Up Swivel with Aluminum CheeksDelrin™ sheave ensures smooth operation and high safe working load. Specifications: Sheave Dia. 2" (51 mm) Max Line 7/16" (11 mm) Diameter includes urethane base 2-7/8" (73 mm) Height 4-1/32" (103 mm) H2 2-3/32" (54 mm) Fastener Size (4), #10 RH...

Jaw/Jaw Open Body Turnbuckle - 1/2-20 ThreadFor those who prefer a traditional body turnbuckle. The forged silicon bronze body, coupled with our integral toggle jaw, provides positive locking and ease of adjustment.Forged silicon bronze bodies with 316 stainless ends offer a great non-galling combination....

Compact Winch Handle MountThis low-profile, anti-snag mount gives you a handy yet unobtrusive place to store your winch handle.Compact Winch Handle Mount 21055. This low-profile, anti-snag mount gives you a handy yet unobtrusive place to store your winch handle.Features: Low profile For all locking...

Stainless Steel Split Rings - 10mm - 10-PackFeatures: Easy-fit stainless steel split rings for use with our clevis pins Supplied in packs of 10 Specifications: Weight: 3g Dimensions: 30mm x 30mm x 4mm

Size 3 45mm Plain Bearing Pulley Block Cheek BlockThe size 3 Barton plain bearing blocks have a 45mm (1 3/4" sheave size 3 block range that incorporates modern design with stainless steel frames and the latest advanced materials, using 30% fiber glass-filled nylon and...

Size 4 58mm Plain Bearing Pulley Cheek BlockThe Size 4 Barton range of blocks has a 58mm (2 5/16″) sheave. They are of a rugged construction featuring high-grade molded side plates that are through-bolted and riveted for added strength and security. All load-bearing components...

Short Adjuster for 3/16" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications: 3/16" Wire 1/4" Pin 1" adj.

Single Threaded Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut.

WindTrak 15WindTrak wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia vane, and easy-to-read, fully adjustable tacking tab system.WindTrak is the perfect choice for all...