Boat Outfitting - Gauge Accessories

Reed Switch Fuel Sender - 300 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal...

Pressure Sender 80 PSI Features: Ground - Standard Connection - 10-32 Stud Voltage - 6-24V Thread - 1/8-27 NPTF Component Reference No. - AT84200 Max. Pressure Range - 80PSI / 5 bar (240-33Ohm) *Sold as an IndividualWARNING: This product can expose you to chemicals including...

Type E Plastic Bulb SocketFeatures: Material - Plastic Class - Type E Connection - Spade *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive...

Temperature Sender 250°F/120°C - 3/8-18 NPTFFeatures: Ground - Standard Connection - Knurled Nut Voltage - 6-24V WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For...

Fresh Water Level Sensor with Sealing Kit #370 - 12-24V - 4-20mA - 80-600mm LengthFresh Water Level Sensor (capacitive) with adjustable dip, sealing kit. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues...

Temperature Sender 1/8" NPTF Cylinder Head TempFeatures: Temperature Sender 1/8" NPTF NPTF Cylinder Head This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Rudder Angle Sensor f/ Single Station Technical Specifications: Measurement Range - 45° - 0 - 45° Signal Analogue - 3 - 180 Ohm Resistance value -  3 - 180 Ohm Operating Voltage - 6 - 24 Volt DC Communication - Analog Wire - 2 Wire...

Reed Switch Fuel Sender - 180mm Most aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for...

Reed Switch Fuel Sender - 900 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal...

ALAS I Adjustable Fuel Sender - 6 to 15-3/4" - 3-180 OhmFor a more economical and practical solution for fuel monitoring for tank depths, VDO ALAS I 12/24 V fuel senders are definitely on the level!  These fuel senders are engineered with a redundant...

Heavy Duty Normally Open–Single Circuit 4 PSI Pressure Switch Features: Ground - Floating Connection - # 8-32 Voltage - 6-24V Circuit - Normally Open - Single Contacts - Silver Alloy Max. Pressure Range - 4 PSI Terminals - 2 *Sold as an IndividualWARNING: This product...

Reed Switch Fuel Sender - 270 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal...

Flange Adapter KitSmall but necessary instrument that will save your money and time.   Flange Adapter Kit for Tubular Level Sensors from 80 to 54mm.Flange Adapter Kit can be adapted to any Veratron liquid level sensors.Features:Tank mounting adapter from 80mm to 54mm*Sold as an...

OceanLink® Lens - 52mmReplacement lens for OceanLink 52 mm gauges.Sold as a Single.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Diameter (mm): 52 Diameter (Inches): 2.16 Color: Clear Box...

Pressure Sender 80 PSI - 1/8-27 NPTFFeatures: Ground - Standard Connection - Knurled Nut Voltage - 6-24V Thread - 1/8-27 NPTF Component Reference No. - 29/4 Max. Pressure Range - 80PSI / 5 bar (10-180Ohm) *Sold as an IndividualWARNING: This product can expose you...

Temperature Sender - 1/8 " NPT Thread1/8"  NPT Dual Station temperature sender.Specifications: Dual station 1/8 inch NPT thread size 10-32 stud terminal Works with US ohm scale temperature gauges Standard ground Factory P/N TS1056*Sold as an IndividualThis product may not be returned to the original...

2" Gauge BlankCover a 2" gauge hole with Faria's Gauge BlankSpecifications: Fits standard hole for Faria's 2" gauges Black in color ∗ Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any...

Inductive Sender - Magnetic Pickup - 2"VDO produces senders that are compatible with its programmable speedometers for most popular domestic applications.Features: Length - 2" Thread - 3/4-16 *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to...

Temperature Sensor 240° F - 1/8-27NPTFAll Temperature sensors are designed to work with VDO gauges only. Sensors are matched to gauges according to maximum reading on dial face. All sensors are standard ground (sensor case to common ground). Please note: VDO sensors have tapered threads...

Oil Pressure Sender - Single StationSpecifications: 1/8" NPTF 0-80 PSI Single Station Standard Ground Factory P/N SD0003This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.