Sailing

Sta-Plug® Mini Emergency PlugThe Sta-Plug® Mini™, Forespar's form-fitting emergency plug. A soft cone-shaped design allows it to easily fill the irregular shapes of hull impact breaches, as well as any round hole leak from a hose or through-hull. Unique edge gripping riblets help hold...

Winch Stripper Rings - 48ST Replacement stripper rings for Lewmar winch.Compatible With:48ST self-tailing winches*Sold as a Pair

72mm Synchro Block - SingleLewmar's Synchro Blocks are engineered for speed, efficiency, and superior handling.  Using a combination of scientifically optimized block geometry, a Free-Spin bearing, and a self-aligning head to reduce friction and increase efficiency by up to 40%, over budget blocks on...

BPI-25 Bulkhead Pipe Gland Reducer 25mm for BPG-50This adaptor enables smaller pipes to be used in conjunction with the BPG-50 Pipe Gland. This will accept pipes between 22.5 and 25mm.These glands give a water and vapor-proof seal between bulkheads. They are flexible and will...

BPI-32 Bulkhead Pipe Gland Reducer 32mm for BPG-50This adaptor enables smaller pipes to be used in conjunction with the BPG-50 Pipe Gland. This will accept pipes between 28 and 32mm.These glands give a water and vapor-proof seal between bulkheads. They are flexible and will...

BPI-20 Bulkhead Pipe Gland Reducer 20mm for BPG-50This adaptor enables smaller pipes to be used in conjunction with the BPG-50 Pipe Gland. This will accept pipes between 18.5 and 20mm.These glands give a water and vapor-proof seal between bulkheads. They are flexible and will...

BPG-50 Bulkhead Pipe Gland 50mm ODThe Barton Bulkhead Pipe Gland BPG-50 is for pipes with an outer diameter between 45-50mm (13/4 – 2″). The required hole cutter is 60mm. It has 4 M6 fasteners supplied.These glands give a water and vapor-proof seal between bulkheads....

Lewmar 250MM Protouch Handle with Power Grip BlackModel: 29141500BK New Black Edition Styling: The same proven reliability, now with a striking, contemporary look. Optimised Winch Handle Grips: Available in single, double, and power grip options for a secure, comfortable hold and maximum efficiency. Extended...

Folding Pad Eye - Diameter 5/16"Features: Perfect solution for fastening applications (stay, blocks, jib tack point, lifeline, tether, etc...) Fully drop-forged product with outstanding working and breaking loads regardless of the angle of the load Modern and optimized design to suit the aesthetics of...

Waxed Whipping Twine - 0.8mm x 40M - RedExcellent for whipping line ends, this twine is pre-waxed with a round construction and will not open because of the flat, strong seem.  The special wax formula makes this whipping twine particularly easy to use with...

Backing Plate for 704-02-62Schaefer Stainless Steel Backing Plate for 704-02-62.

Furler Pull Back Bracket/Haylard Restrainer - LargeHalyard Restrainer mounts directly on the front of the mast below the Genoa Halyard sheave. Restrainer "deflects" halyard eliminating Halyard Wrap.Halyard Restrainer appropriate for boats from 27' - 53'. Eliminates possibility of halyard wrap with furling systems when...

Stamped "D" Shackle - 1/4"Pin Dia. 1/4" (6 mm), Depth 1" (25 mm), Width 11/16" (17 mm), SWL 1750 lbs. (795 kg), Weight 1.1 oz. (31 g)

Aluminum Deck Cleat - 6"Length 6" (152 mm), Line Score 5/8" (16 mm), Fasteners (2), 1/4" FH (6 mm), C/C A 1-1/2" (38 mm), Weight 3.5 oz. (99 g)

2-3/8" Aluminum SheaveFeatures: Material: Aluminum Max Line 5/8" (16 mm) Max Wire 3/16" (5 mm) Outside Diameter 2-3/8" (60 mm) Inside Diameter 1/2" (13 mm) Width 3/4" (19 mm)

Hawk Race for Single Handed Racing DinghiesThe Hawk Race brings all the benefits of the Hawk Wind indicator with it's "V" jewel bearing and balanced vane arm. Mounts in a secure manor at gooseneck height in front of the mast. Designed primarily for larger...

Single Aluminum Block - 51mm SheaveSingle block with anodized aluminum cheeks. Delrin™ sheave ensures smooth operation with high safe working load. Swivel head may be locked in place to avoid twist. Specifications: Sheave Dia. 2" (51mm) Thickness 15/16" (24mm) Width 2 1/8" (54mm) Length 4...

Single Ball Bearing BlockSingle block with aluminum cheeks and ball bearing sheave. Delrin™ ball bearing sheave ensures low-friction operation. Swivel head may be locked in place to avoid twist. Specifications: Sheave Diameter 2" (51mm) Thickness 15/16" (24mm) Width 2 1/8" (54mm) Length 4 13/32" (112mm)...

T-Track Endstop for 1" Track - Black1" Black Endstop Specifications: Color: Black Box Dimensions: 1"H x 2"W x 4"L WT: 0.5 lbs UPC: 740507007248

T-Track Endstop for 1" Track - Grey1" Grey Endstop Specifications: Color: Grey Box Dimensions: 1"H x 2"W x 4"L WT: 0.5 lbs UPC: 740507007255