Ram Mount Store - C Size

RAM 2.5" Round Base (AMPs Hole Pattern), 1.5" Ball & 1/4"-20 Threaded Male Post for CamerasThe RAM camera base contains a 1.5" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 1/4"-20 threaded steel stud, centered, the round...

RAM 6.25" x 2" Universal Electronics Base with 1.5" BallThe RAM-111BU consists of a 1.5" diameter rubber ball connected at right angles to a flat 6.25 x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many...

RAM® Swivel Double Socket Arm for B Size & C Size Specifications: Product Dimensions: Overall Length: 5.24" Ball Size: B Size (1")/C Size (1.5")  Weight Capacity: Standard Use: 2 lbs/Heavy-Duty Use: 1 lb Materials: High-strength composite Weight: 0.48 lbs

RAM 2.5" Round Base (AMPs Hole Pattern) with 0.31-18 female thread & 1.5" BallThe RAM-202U-MT1 consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base with 0.31-18 female thread. This mount has pre-drilled holes, including the universal AMPS hole pattern....

RAM 1.5" Ball Base w/Strap 0.5" to 2" DiameterThe RAM-108BU consists of a 1.5" diameter ball connected to a base with single strap. The strap will accommodate rails from 0.5" to 2" in diameter.Material:Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size...

RAM 2" x 4" Rectangle Base with 1.5" BallThe RAM-202U-24 consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 4" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine...

RAM Double Socket Arm with Diamond Plate - C Size Medium This mount consists of the 1.5" C-size diameter ball and socket system with one open socket end; the RAM-201U socket arm is the medium length at 5.69" end to end with 4.66" socket-to-socket length. This...

100 x 100mm VESA Plate w/1.5" Ball This RAM-246U consists of a 1.5" rubber ball, connected to a 4.75" square plate with 4x100mm holes and 4x75mm holes in each corner.  Square plate features the VESA hole pattern for connection to a wide variety of...

RAM® Handlebar U-Bolt Ball Base with No HardwareThe RAM-231U-AC1 is a 1.5" diameter C-size ball with a handlebar clamp base. No hardware is included. If you need the installation hardware as well please take a look at RAM-231ZU.Specifications: Ball Size (inch): C size (1.5") Weight...

Double Socket Swivel ArmSpecifications: Ball/Socket Size: C Size (1") Weight Capacity: 2 lbs Materials: High strength composite Weight: 0.65 lbs.

RAM® Ball Adapter with M10 X 1.25" Threaded PostThe RAM-B-349U includes an M10 x 1.25 pitch male thread connected to a 1" rubber ball. The threaded hole must contain the following dimensions for this base to fit: M10 1.25 pitch with a 14.5mm flange...

2.5" Composite Round Base w/AMPS Hole Pattern & 1.5" BallThe RAP-202U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern.Material: High Strength Composite Ball Size: 1.5" Rubber Ball...

Mixed Combination Pin-LockT Security Knob and Key Knob for 1.5" Diameter C Size ArmsThe RAP-S-KNOB5U consists of a 5/16"-18 female threaded security knob and key knob. The RAP-S-KNOB5U replaces all knobs on 1.5" diameter C size arms and mounts. The RAP-S-KNOB5U offers the ideal...

Square Post Clamp Base 2.5" Wide with 1.5" BallThe RAM-247U-25 consists of a 2.5" clamp base with 1.5" ball. Features: Material: Powder Coated Marine Grade Aluminum Ball Size: C Size 1.5" Rubber Ball Note: The "U" in the part number reflects product packaged in poly...

The RAP-111BU consists of a 1.5" diameter rubber ball connected at right angles to a flat 6.25 x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios,...

RAM® Tough-Mag™ 88MM Diameter Magnetic Ball Base - C SizeThe RAM® Tough-Mag™ base consists of a C-size 1.5" diameter 2-hole AMPS pattern diamond ball base connected to a flat 88mm diameter magnetic base. The magnetic base contains two M4 threaded inserts to attach the...

RAM Rail Base with "Rust-Proof" Stainless Steel U-Bolt & 1.5" Ball for Rails from 0.5" to 1" in DiameterThe RAM motorcycle handlebar base contains a 1.5" rubber ball designed to sit at right angles to the mounting rail. The "Rust-Proof" stainless steel u-bolt accommodates...

Square Post Clamp Base for Posts Up To 1.5" WideThe RAM-247U-15 consists of a 1.5" clamp base with 1.5" ball. Features: Material: Powder Coated Marine Grade Aluminum Ball Size: C Size 1.5" Rubber Ball Weight: 0.45 lbs

RAM Spotlight Base w/3/8"-16 PostThe RAM-236U consists of a 1.5" diameter rubber ball, connected to a 3/8"-16 thread. Material: Powder Coated Marine Grade Aluminum Ball Size:1.5" Rubber Ball Size Note:The "U" in the part number reflects product packaged in poly bag.

RAM 2" x 2.5" Rectangle Base with 1.5" BallThe RAM-202U-225 consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine...