Marine Navigation & Instruments - Transducers

B75H Bronze Chirp Thru Hull 12° 600WRequires Mix & Match CableRely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’)...

Compatible with the following instruments:ST70* ST60+ ST290Compatible hull material: Wood and FiberglassFrequency: 200 kHzCable: 45ft cableHole diameter for installation: 2"Note: E66023 Fairing block sold separately.*Using with ST70 requires purchase of ST70 Speed Pod and ST70 Depth Pod, sold separately. Specifications: Temperature: Yes Speed Included:...

TM185C-HW-MM CHIRP Transducer Transom Mount Needs Mix & Match CableGet more coverage under the boat with Airmar's wide beam Chirp. Offering a high frequency range of 150-250 kHz and a constant 25° Beamwidth, this transducer is truly broadband at its best. In addition to...

B175M Bronze Thru Hull 12° Tilt - 1kWRequires Mix and Match CableRely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to...

B175M Bronze 12 Degree Thru-Hull 1kW for Garmin with 8-Pin ConnectorThe B175M’s medium frequency delivers the right combination of coverage under the boat, extended depth range, and the ability to produce clean and accurate target and structure returns in mid to deeper water. Medium...

GT8HW-IH In-Hull Transducer - 8-PinGT8HW-IH transducer is ideal for bass boats that want to install the transducer inside a fiberglass hull and not on the transom where cavitation could cause issues. It requires a flat section in the hull to be mounted and is...

Compatible with the following instruments: ST70* ST60+ ST290Compatible hull material: Aluminum and fiberglassCable: 45 ft. cableHole diameter for installation: 2"*Using with ST70 requires purchase of ST70 Depth Pod, sold seperately. Specifications: Temperature: No Speed Included: No Mounting Style: Thru-Hull Chirp: No Cable Length (Feet):...

600W Transom Mount TransducerFeatures: 600 Watts 50/200 kHz 45/11 degree Beam Angles Plastic Transom Mount with Temperature and Removable Speed Assembly 30 Foot Cable with 10-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of California to...

B275LH-W Bronze Thru-Hull for Garmin with 12-Pin ConnectorGet more coverage under your boat with Airmar’s unique wide-beam, low and high-frequency, Chirp-ready B275LHW. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies,...

B175M Bronze 0 Degree Thru-Hull 1kW for Garmin with 8-Pin ConnectorThe B175M’s medium frequency delivers the right combination of coverage under the boat, extended depth range, and the ability to produce clean and accurate target and structure returns in mid to deeper water. Medium...

B75M Bronze Chirp Thru Hull 20° Tilt - 600WRequires Mix and Match CableRely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down...

Airmar B75Hw/20° Tilt600WFlush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high frequency versions provide maximum flexibility for the choice of frequencies. Excellent for fiberglass and wood hulls.Max Depth - 800'Suppoarted...

Smart Thru-Hull Mount Transducer with Depth & Temperature (20°, NMEA 2000®) - Airmar DT800Our plastic smart thru-hull mount transducer provides depth and temperature data to your NMEA 2000 network.This 100 W transducer has a depth of 600 ft; an operating frequency of 235 kHz;...

Airmar B175Hw/20° Tilt1kWFlush-mounted bronze housing protrudes less than 1/4" outside hull and can sit on trailer rollers/bunks without damage. Tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high frequency versions provide maximum...

Airmar B150Mw/12° Tilt300WFlush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high frequency versions provide maximum flexibility for the choice of frequencies. Excellent for fiberglass and wood hulls.Entry Level Chirp Solution....

P19 20 Degree Tilted Element™ Thru-Hull with 8 pin Connector for GarminMinimize Your DragThe P19 model have been the standard in low-profile models for many years. Their large sensitive ceramics allow deep echo sounding up to 206M (700'). These nearly flush units minimize drag...

B164 Bronze Thru-Hull - 50/200 kHz - 1 kW - 12° Tilted Element - Requires Mix & Match Cable12° tilted version for 8 to 15° hull deadrise angles. Step up to a 1 kW—without a fairing! The 1 kW, flush-mount, Tilted Element™ transducer is...

B275LH-W Bronze Thru-Hull Transducer - 12-PinGet more coverage under your boat with Airmar’s unique wide beam, high frequency Chirp-ready transducers. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high...

GST™ 43 Thru-Hull Speed/Temperature TransducerThe GST 43 is a thru-hull transducer that can read water speed and temperature. The transducer can retrofit an existing Nexus 43mm thru-hull transducer (TH43).Bundled with the GST 10, the GST 43 can connect directly to the NMEA 2000® network,...

GT12M Bronze Thru-Hull - 350W - 0 DegreeDesigned for reduced drag and optimum sonar performance on midsize fishing and cruising boats, this flush-mounted, 350-watt mid-band CHIRP transducer clearly defines fish arches, structure, and bottom depth returns on your display.Midband Chirp Traditional SonarThis 8-pin, 350-watt...