Trailering - Rollers & Brackets

Bunk Mounting Bracket - GalvanizedThe heavy-duty galvanized hat-style bunk mount bracket attaches the bunk to upright bunk brackets on 3x3 cross members on trailers not exceeding 4,700 lbs capacity.Used primarily for the front bunk support, and on a few "Limited" models, used for rear...

Shackle Tandem Hanger Galvanized Frame Hanger - 2"C.E. Smith heavy-duty equalizer hanger is galvanized and designed to work on 2" wide frame rails.

Step Fender - Galvanized Wide Frame - Large 2"C.E. Smith heavy-duty pre-punched galvanized step bracket mounts to a 2" wide frame, one bracket required per step.

8-12 2" BM15 13/16" Galvanized Spring Hanger C.E. Smith heavy-duty galvanized spring hanger.

Bow Stop 8.25" Strap Galvanized Mounting BracketC.E. Smith heavy-duty galvanized strap mounting bracket bolts to the cross member on trailers to support the bow stop.

Shackle Tandem Hanger Galvanized Frame Hanger - 3"C.E. Smith heavy-duty equalizer hanger is galvanized and designed to work on 3" wide frame rails.

Vertical 90° Bunk Bracket - 5" x 8" - Aluminum5” wide and 1/4” thick these heavy duty vertical bunk brackets are strong enough to mount large bunk boards to carry larger boats. Sold individually.

Spool Roller 5" - 5/8" ID - Gold TPR with Bushing White SolidFeatures: Fits standard brackets and shaft sizes Natural rubber 2-7/8" Diameter 4-7/8" Width Gold TPR 5/8" Shaft

Tail Light ProtectorAdded protection for fragile trailer tail lights. Mounts between the existing tail light mounting brackets and the lamp using the two lamp mounting studs. Mounting holes fit standard DOT brake/tail lamps. No hardware required for installation. Aluminum tread 0.080" thick

Panel Bracket Assembly 5" Keel Roller - BlackProduct DescriptionPre-assembled for easy installation! Strong hot-dipped galvanized bracket with black rubber roller for proper keel support. Mounting slots are 3" on center.

Trailer Frame Clips - Zinc - 3/8" Wide - 10-PackAll trailer light kits come with a few of these clips, but never enough to secure the wiring along the frame as frequently as you want. With a pack or two of these clips, you...

3" Bow Bell Roller Assembly - Yellow TPRDurable thermal plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact.Features: Yellow TPR 4-1/2" diameter 6" Wide 1/2" shaft Fits 3" wide center roller bracket

Bow Roller - Yellow PVC - 3" x 1/2" IDDurable thermo plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact. 2 sizes to fit bow stands with a 3” wide or 4” wide center roller bracket....

Vertical Bunk Bracket Dimpled - 7-1/2"Adjustable bunk bracket. Used when mounting bunks on edge. Ideal for small craft trailers. A single bracket will allow the bunk board to pivot with the hull as the boat is loaded. Double brackets hold the board in place.Features:...

4" Bow Bell Roller Assembly - Black TPRDurable thermal plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact.Features: Black TPR 5-1/2" diameter 8" Wide 1/2" shaft Fits 4" wide center roller bracket

Stake PocketThe easiest and most secure way to add removeable sides to a trailer. Sized to receive standard 2" x 4" studs.Features: Bolts onto trailer 11 gauge Hot dipped galvanized 3/8" holes for bolting to frame Center hole for an optional locking bolt Dimensions:...

Heavy Duty Spare Tire Carrier27310GGet that spare tire out of your way, mount it up on its side and it looks great too. Hot dipped galvanized for lasting protection. Holds either 4 or 5 lug wheels and fits all trailers frames up to 3"...

Swivel Bracket KitGalvanized swivel top brackets provide vertical and tilting adjustments for trailer bunks.Swivel Brackets for mounting Bunk Boards to Bolster Brackets.Features: Bunk flange holes 3/8" dia. Bunk flange 1-3/8" x 3-1/2" Swivel flange hole 1/2" dia. Swivel flange 2" tall x 3-1/2" 2-1/2"...

1-1/2" Wide Keel Base Roller Assembly f/2" - 2-1/2" TongueProduct DescriptionThis roller assembly supports your boat's keel for easy loading and safe transport on your trailer. It features a 4", black rubber spool roller and a galvanized steel bracket that attaches to your trailer's...

Double Slot Swivel Bolster Bracket Assembly - 12"C.E. Smith's adjustable bracket is designed to support roller bunks. Hot dip galvanizing for years of use in the harsh marine environment. This bracket assembly uses bolster bracket-10102G and swivel bracket-10200G.Features: Bolster bracket: 12" bracket, 11 gauge...