Electrical - Busbars, Connectors & Insulators

Busbar 250A 4P & Cover 4X 5/16" TerminalsBusbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment.We offer a number of busbars with different current ratings, and a different number of connection terminals. Each...

Cover for 2304 and 2305Great for limited space applicationsBase Material: Reinforced PolycarbonateCover Material: Clear PolycarbonateContinuous Amperage: 100 Amperes AC/DCVoltage Rating: 300 Volts AC Maximum / 48 Volts DC MaximumBus Material: Tin-Plated Copper CDA / UNS11000WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate...

2356100 - Water Resistant 100A Busbar with CoverWater-resistant bussing for harsh environments.  Built with wing screws for toolless access.Features:Accepts a wide range of wire sizes Includes 3 wire plugs to maintain a water-resistant rating if less than 4 wires are used Nests with other...

2103 PowerPost Plus Cable Connector 3/8" Stud Enables connection of multiple smaller wires in spaces where a traditional bus bar may not fit.Features: 150 Ampere bus allows small wire connections at high amperage cable connections Connects high amperage cables securely Stud dimensions: 3/8" x 3/4"...

BEP Pro Installer Terminal Block - 6 Way - 30AThis terminal block is ideal for isolated connections up to 30A and suitable for connecting tails from AC and DC panels.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to...

Insulated Distribution Stud, Single 1/4"Insulated Distribution Stud, Single 1/4" - Made with high temperature plastic bases Stud covers push securely over the threaded stud covering to ABYC standards Dual studs ideal for +ve / -ve connections, branch circuits, windlass or inverter installations Covers supplied...

Busbar to Connect 5 Mega Fuse Holders Busbar Only Fuse Holders Sold SeparatelyPlease contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Cover for Busbar The industry standard busbar for positive distribution The industry standard busbar for the collection of negative or AC ground circuits WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause...

RT Screw Terminal 12 Circuit Dual Lever Bus BarThis Egis bus bar seamlessly integrates with RT fuse blocks, can be used as a standalone ground bus, or can be assembled with an existing RT Series fuse block line. Also, this multi-level low-amp has terminal...

C4009 CableCap - Black 0.47 to 0.13 StudFeatures:Insulate stud type connectors on alternators, starters, windlasses and other high amperage devicesWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or...

2722 DualBus Plus 1/4" Stud, 5 x 10-32 Screw TerminalFeatures: Combines negative and positive buses on one block Clear polycarbonate cover snaps on to meet Coast Guard and ABYC insulation require WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is...

9218 Terminal Block Jumpers for 2400 Series Blocks - Package of 5Features: Jumpers allow creation of common circuits on independent connectors Fits 20 AMP terminal blocks (2400 Series) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the...

Buss Bar with Cover - 6 TerminalsThis bus bar is designed for positive or negative DC distribution or collection of AC neutral or safety ground circuits. Constructed of corrosion-resistant tin-plated Copper and ABS with a polycarbonate cover.Features: Includes two 5/16"-18 stainless steel stud terminals...

BB-2 Bus BarIdeal as a DC ground tie point or positive bus, this heavy-duty, 500-amp-rated bus bar assembly features 5/16 in. studs on 1 in. center in 1/4 in. thick copper bar for common connection or distribution of large wire gauges.Features: Accommodate 5/16" ring...

BB-8 Bus BarIdeal as a DC ground tie point or positive bus, this heavy-duty, 500-amp-rated bus bar assembly features 5/16 in. studs on 1 in. center in 1/4 in. thick copper bar for common connection or distribution of large wire gauges.Features: Accommodate 5/16" ring...

PowerBar 1000 - 12 3/8" Terminal Studs w/CoverComplex wiring systems require a single point to consolidate large and small conductors. The PowerBar 1000 offers a 1,000 Amp busbar with various size studs and screws to connect conductors and fuse blocks.Features: 1,000 Amp busbar for...

PowerBar Common BusBarTerminal Studs: 2x3/8"-16Provides compact high-ampere busing with 3/8" terminal studsWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to...

PowerBar 1000 - 12 5/16" Terminal Studs w/CoverComplex wiring systems require a single point to consolidate large and small conductors. The PowerBar 1000 offers a 1,000 Amp busbar with various size studs and screws to connect conductors and fuse blocks.Features: 1,000 Amp busbar for...

4005 Standard CableCap - Small PairFeatures: Cable Size - 4, 2, 1 Pair - Red/Black Insulates battery terminals which have added adapter terminals For batteries with marine adapter terminals added on WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is...

4006 Standard CableCap - Large PairFeatures: Cable Size - 1/0, 2/0 Pair - Red/Black For batteries with marine adapter terminals added on WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer,...