Clearance

B60 20° Bronze Thru-Hull Mix & Match Cable NeededThe B60 is a 600 W, 50/200 kHz transducer that integrates Airmar’s popular, Tilted Element™ feature. This Tilted Element transducer has the ceramic element fixed at either a 20° or 12° angle within the housing. When...

B175MW Med Ultra Wide 1kW, 20° Chirp Thru-Hull Transducer f/12-Pin Garmin175MW Med Ultra Wide 20 Degree, 1KW Chirp Thru-hull Transducer with 12 Pin Connector for Garmin Airmar's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the Chirp-ready B175...

B175MW Med Ultra Wide 1kW, 20° Chirp Thru-Hull 12-Pin Transducer for Furuno TZTouch3The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum...

B175MW Med Ultra Wide 20°, 1KW Chirp Thru-Hull Transducer with 8-Pin Connector for Garmin Airmar’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the Chirp-ready B175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The B175MW takes transducer design...

B175MW Medium Ultra-Wide 20-Degree 1kW CHIRP Transducer Requires Mix & Match CableAirmar’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the Chirp-ready B175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The B175MW takes transducer design and performance...

B75HW High Wide Tilted Element Chirp Transducer - 12 Degree Deadrise, 600W Thru HullRequires Mix and Match Cable for the appropriate Fishfinder it will be connected to.Airmar’s low-profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The B75HW...

CM599LH 1-3kW Pocket Mounted Transducer - No ConnectorHaving the right tool for the job makes the job easier and gives better results. The right tool for covering deep-water haunts of swordfish, tuna, and other species is a 2 to 3 kW, low and high-frequency...

Mix & Match Cable for Raymarine 600W Non-CHIRP Transducers - 9mMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail attached to the transducer ends...

TM265C-LM-12F Transom Mount Transducer with 12-Pin Connector for Furuno TZT12F, TZT16F & TZT19FRely on Airmar's broadband transducers for the ultimate fishing mission! Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town. Traditional marine fishfinders operate at discreet...

Furuno 12-Pin Mix & Match Cable for CHIRP Dual Element TransducersFor use with Airmar's Mix and Match CHIRP transducers up to 1kW (1,000 watts).This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or...

NMEA2000 Cable - 10MWeatherStation cables are available in four versions: NMEA 0183, NMEA 2000, combined NMEA 0183 and 2000, and Furuno NMEA 0183. All cables have a round white connector at one end that fits into the base of a weather station.NMEA 2000 cables...

B60 Thru-Hull Transducer 20° Tilt 9-Pin for Navico xSonicThe B60 is a 600W, 50/200 kHz transducer that integrates Airmar’s popular, Tilted Element™ feature. This Tilted Element transducer has the ceramic element fixed at a 20° angle within the housing. When the transducer is installed...

Navico 9-Pin Dual Mix & Match Cable for Dual Element TransducersFor dual-socket Navico/Lowrance/Simrad xSonic 9-pin equipment Mix and Match Cables for CHIRP TransducersMany CHIRP transducers are now made as Mix and Match models. These versions have a common base transducer with an attached 9-meter...

MM-8G Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable.The short pigtail attached to the transducer ends in an Airmar...

TM165HW Chirp High Wide 600W Transom Mount Transducer - Requires Adapter CableReplacing a non-Chirp or single frequency transducer with the AIRMAR TM165HW (High Wide) 600W Chirp-ready transom mount transducer provides anglers with an inexpensive and easy performance upgrade to their current sonar systems. The...

Raymarine 11-Pin High or Med Mix & Match Transducer CHIRP Cable for CP470 Airmar MMC-11R CHIRP Mix and Match Transducer Cable 1M Raymarine 11-Pin.For use with Airmar's High or Med Single Band Mix and Match CHIRP transducers up to 1kW (1,000 watt).This product may not...