Ram Mount Store

RAM® Vertical Track Tie Down – 2 PackAs a pack of two, the RAM® Vertical Track Tie Down system features a T-Bolt and provides an anchor point for use with a track mounting system, allowing you to secure coolers and other accessories to your...

RAM® Tough-Cleat™ for the Tough-Track™Create an anchor tie-off point for your kayak with the RAM® Tough-Cleat™. While fishing on the river or lake, moving the Tough-Cleat to an ideal position is easy – simply loosen the knob and slide along your track mounting system....

RAM Universal Finger-Grip™ Phone/Radio HolderThe RAM Composite Universal Finger Grip Holder is designed to hold a large amount of cell phones and electronic devices. The holder comes with (3 sets) of four flexible rubber coated fingers placed along sides to grip your device. The...

RAM® X-Grip® for 7"-8" Tablets with RAM® Stubby™ Cup Holder BaseThe RAP-B-299-4-UN8U consists of a spring loaded cradle with grip knobs on the back for a quick release function of your tablet. Connecting to the X-Grip is the RAM Stubby™ cup holder mount. The durable...

RAM® X-Grip® with RAM® Pod™ I Vehicle Mount for 12" TabletsThe RAM-B-316-1-UN11U consists of the RAM POD I universal No-Drill® vehicle base, 18” rigid aluminum rod, socket system and universal X-Grip® clamping cradle for 12" tablets. The base of the mount connects to your...

Description:The RAP-201U, standard double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment...

Small Tough-Claw™ Base w/Short Double Socket Arm and Universal X-Grip® Cell/iPhone CradleThe RAM-B-400-A-HOL-UN7BU consists of the Tough-Claw™ rail clamp base, SHORT length double socket arm and universal spring loaded X-Grip® cradle for phones. The spring loaded X-Grip® cradle expands and contracts, allowing for a...

The RAP-111U consists of a 2" x 1.7" 2" x 1.7" square base that contains the universal AMPs hole pattern, STANDARD LENGTH double socket arm and 6.25" x 2" rectangle base. The rectangle base contains different combinations of pre-drilled holes which will match up...

RAM® Vertical Drill-Down Vehicle Base with Lower RAM® Tele-Pole™Vehicle base for: Commercial vehicles with tube frame seats. May also be used as a drill down base for most any flat surface.Features: Installs in minutes with no drilling required for many uses Base can be...

RAM® No-Drill™ Mount for '14-20 Ford Transit Full Size VanThis RAM® No-Drill™ mounting system installs quickly and easily into the Ford Transit full size van using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from...

Stubby Cup Holder Mount with Double Socket ArmThe RAM Stubby™ cup holder base is a low-profile option of our cup holder mounting base. The durable composite shell construction and flexible support fins can be trimmed to size make this cup holder base a portable and...

RAM Tab-Tite™ Holder for Small Tablets including the Amazon Kindle Fire, Apple iPad mini, Google Nexus 7 & Motorola XYBOARD 8.2Now that you've got the right tablet for the job, you are going to need the right mounting system. Get the most out of...

RAM POD I Universal No-Drill™ Vehicle Mount with 18" Rigid Aluminum Rod & Round Adapter BaseThe RAM-B-316-1-202U, universal RAM-POD I vehicle mount, consists of a RAM 1" diameter ball and socket system, connected to a 18" long flexible rod. The base consists of a...

RAM® 6" Curved Extension Swing Arm for Horizontal & Vertical MountsThe RAM-109-1AU is a bent 6" long Arm extension for the RAM 109 series. This arm includes a 4" long bolt, washers, and a tightening knob.Specifications: Hardware Included: (1) 3/8"-16 x 4.5" Hex Bolt,...

Composite Ball Adapter with AMPS Plate The RAP-B-347U base consists of a 1" diameter rubber ball connected at right angles to a 2" x 1.7" square base. The base has four pre-drilled holes at each corner, making the universal 1.5 x 1.188 (hole spacing) AMPS...

Composite Drill-Down Double Ball Mount with Rectangle AMPS Plates This composite drill-down double ball mount features two AMPS hole pattern bases with 1" diameter balls. Each base has four pre-drilled holes at each corner with 1.5" x 1.188" hole spacing. These bases attach directly to...

RAM 1.5" Max Width Square Rail Base with 1" Diameter BallMaterial:Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball Size Note:The "U" in the part number reflects product packaged in poly bag.

100x100mm VESA Plate w/2.25" Ball  Square plate features the VESA hole pattern for connection to a wide variety of devices Included D size 2.25" RAM® rubber ball allows for connection to any D size RAM® double socket arm; ball and socket technology allows for...

Description:The Ball Side Track Base consists of a t-bolt, ratchet tooth and groove composition and 1.5" rubber ball. With a turn of the knob you can quickly fasten, adjust or remove the base to your existing track system. The ratchet tooth and groove composition...

RAM Double 1" Ball Adapter The RAM-B-230U, double ball joiner, consists of a 1" rubber ball on both ends that allow the connection of two 1" socket arms. When measured from ball center to ball center the arm length is 1.75". This mount is...