Marine Navigation & Instruments - Transducer Accessories

Kayak Scupper Transducer MountLowrance's transducer mounting systems for sit-on-top fishing kayaks. The Transducer Kayak Scupper Mount is perfect for all HDS, Elite, Mark and X-Series Lowrance Skimmer transducers, both 83/200 kHz and 455/800 kHz DownScan Imaging (DSI) models alike, as well as earlier 1-inch...

Adapter cable, 7 pin BLUE to bare wires Specifications: Type: Adapters Box Dimensions: 2"H x 4"W x 7"L WT: 0.3 lbs UPC: 042194535111

A80328 Adapter CableProduct Compatibility: Single B75/B175 Operation Cable Specifications: Type: Adapters Box Dimensions: 2"H x 9"W x 12"L WT: 0.4 lbs UPC: 723193796351

Transducer Mounting PlateFeatures: Marine-grade polymer plate will not warp or corrode Premium materials; unaffected by UV rays Mounts easily with only 2 screws All hardware included Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 4"W x 12"L WT: 1 lbs UPC: 022697941107

Extension Cable with XID - 12-Pin - 10'Extend the cable length of your compatible 12-pin transducer with this 10 foot (3 meter) cable. Supports 12-pin Airmar transducers with XID.WARNING: This product can expose you to chemicals which are known to the State of California...

9-Pin Black to 7-Pin Blue Adapter Cable f/XID TransducersThe 9-to-7-Pin Transducer Adapter enables xSonic 9-pin transducers to connect to legacy 7-pin displays.Use with Airmar Chirp transducers Specifications: Type: Adapters Box Dimensions: 2"H x 6"W x 8"L WT: 0.5 lbs UPC: 9420024165355

Transom Mount Bracket f/Livescope Plus LVS34Easily attach your compatible LiveScope™ transducer to the transom of your boat with this stainless steel mount. Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 7"W x 7"L WT: 2.6 lbs UPC: 753759298517

HDI Trolling Motor XDCR Adapter CupFor using HDI 83/200 and 455/800 kHz XDCR on a trolling motor Specifications: Type: Adapters Box Dimensions: 3"H x 7"W x 8"L WT: 0.2 lbs UPC: 9420024121924

Extension Cable for HOOK² TripleShot/SplitShot Transducer - 10'10' extension cable for connecting TripleShot/SplitShot Transducers to HOOK² Specifications: Type: Extension Box Dimensions: 2"H x 6"W x 10"L WT: 0.55 lbs UPC: 9420024171813

ActiveTarget™ 10' Extension CableThis extension is compatible with Lowrance ActiveTarget™.Features:10 ft. cable Specifications: Type: Cables Box Dimensions: 3"H x 6"W x 8"L WT: 1.15 lbs UPC: 9420064130436

ActiveTarget™ Trolling Motor Shaft MountAttach an ActiveTarget™ transducer to the shaft of your trolling motor with the trolling motor shaft mount for Forward, Down and Scout views.

0 Degree Livescope Pole MountPosition your Panoptix LiveScope™ LVS32 transducer on this 0 degree pole mount for an optimal viewing angle while ice fishing (works for open water fishing too).

8-Pin Female to Wire Block AdapterGarmin's adapter allows you to connect the wires on legacy 6-pin transducers with newer sonar that requires an 8-pin connection.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth...

Trolling Motor BracketTrolling Motor Bracket specifically designed for the Dragonfly CPT-DV and CPT-DVS transom mount transducers. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 6"W x 8"L WT: 0.2 lbs UPC: 723193796177

Adapter Cable for CPT-S Transducers To Axiom Pro S Series UnitsAdapter Cable (25 pin to 9 pin) attach DownVision (CPT-1xx) transducer to Axiom RV.Features: Type: 25 pin to 9 pin Applications: DownVision (DV) and RealVision (RV) Transducers Function: Connect DownVision or CHIRP Transducer to...

Furuno 10-Pin Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail attached to the transducer ends in...

Adapter Cable - 25-Pin to 7-Pin - CP370 Transducer to Axiom RVThe Raymarine transducer adapter cable allows you to keep your existing 600w Airmar transducer used with a CP370 sonar module and adapts it to your Axiom RV. The 7-pin side connects direct to...

Adapter Cable for Axiom Pro with CP370 TransducerUsed to connect a conventional 600W transducer to an Axiom Pro multifunction display. 11-pin to 8-pin adapter cable to attach to an existing 8-pin Airmar CP370 style transducer to Axiom Pro. Specifications: Type: Adapters Box Dimensions: 1"H...

RealVision 3D Transducer Extension Cable - 8M (26')RealVision 3D Transducer Extension Cables work with the transom-mounted RV-100 and through-hull RV-200 and RV-300 series transducers.  Each extension cable features a waterproof, twist-lock connector at the MFD end, and a compatible socket at the transducer end....

iTC-5 Instrument Transducer ConverterThe iTC5 Instrument Transducer Converter enables the use of common analog transducer signals with new digital instrument displays like Raymarine's i70 and ST70 Plus. The ultra-compact iTC5 has connections to host the five most common analog transducers; depth, speed/temperature, wind, compass...