Marine Navigation & Instruments - Accessories

Suzuki 9.9, 15 Remote Shift/Throttle & Tiller (2014-Present)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the...

173 2-1/4" Ball Mount for Fishfinder & ChartplotterFeatures: The Scotty 2.25″ Ball Mount enables anglers to mount larger fish finders on their watercraft It’s designed for 10″-12″ fish finders and offers sturdy and secure holding power Prefabricated holes on the top plate allow easy...

Trunnion Mounting Kit for Axiom & Axiom+ 9This Raymarine mounting bracket is designed to be used with Axiom and Axiom+ 9.Features:The included knobs secure the Axiom display to the bracket Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 6"W x 10"L WT: 1.25 lbs...

Pole Mount for SCX20 & SCX21 Satellite CompassThis Furuno pole mount is specifically for the Furuno SCX20 and SCX21 satellite compasses.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type:...

ZC2 Remote PortraitPerfectly designed for mounting in a cockpit pedestal, by the chart table or in other locations suiting a ‘portrait’ orientation. The B & G ZC2 Remote Controller provides intuitive keypad and rotary-dial command of up to six Zeus², Zeus³, Glass Helm or...

GA™ 38 GPS/GLONASS Antenna for Cortex® V1 & M1Built to take advantage of the GLONASS system/constellation of satellites as well as standard GPS, this robust external antenna is packaged in a low-profile water-resistant housing and provides 3 easy mounting solutions: pole, surface, or under-deck...

M12 to RJ45 Female Adapter - 1.5MThe Lowrance M12 to RJ45 Female Cable (1.5M) is primarily used to connect older or different marine electronics to standard Ethernet networks, converting the waterproof 8-pin (M12) Navico connector into a standard RJ45 female port.

Gimbal Mounting Bracket for NSS9 evo3, Zeus3 & Cruise 9 NSS9 evo3, Zeus3 and Cruise 9 - Mounting Bracket  Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 5"W x 14"L WT: 0.7 lbs UPC: 9420024161043

Waterproof USB Cable - 5M (16')USB cable for the AISWatchMate 850, AISWatchMate Vision, and XB-8000 transponders5M (16') USB cable with a waterproof connector that twists locks into the USB socket on a Vesper Marine transponder and has a standard PC USB connector for your...

Power Cable for Cortex - 6'Replacement 6’ Power Cable for the Cortex M1 & V1.

CLMD16-J3 I/O Mating Connector KitJ3 (I/O Gen Purpose) Harness Kit with 1m Flying Leads.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Remote Key FobMaretron's remote key fob allows you to control and monitor certain features of your vessel remotely, such as powering on/off specific systems or switching between different modes like "Sleep Mode". It typically works in conjunction with a Maretron digital switching system and...

Elite FS 9 SuncoverProtect your Elite FS from the elements with this suncover for 9-inch screens. Specifications:Type: Covers

Pole Mount Kit for HS75Specifications: Weight: 0.3kg Dimensions: 16.2 x 16.2 x 0.3cm Class: Instruments Specifically for Simrad's HS75 Specifications: Type: Pole Mount Box Dimensions: 6"H x 6"W x 6"L WT: 0.9 lbs UPC: 9420064116881

0.3M Daisy Chain Cable for Alpha DisplaysDaisy chain up to four Alpha Performance Displays together to create the ultimate data display. Daisy chain cables attach seamlessly to the back of each display.Features: 0.3-meter Daisy Chain Cable  Suitable for both 7” and 9” Alpha Displays...

MCU002 Remote Control UnitThe MCU002 is a compact, waterproof remote control unit for use with the TZT9/14/BB. It offers the expandability of multi touch operation of the TZT9/14/BB to the hardware key operation, as the best supplemental tool to multi touch operation. With the...

MCU005 Keyboard for TZTouch2 & TZT2BBKeyboard for TZTL12F, TZTL15F and TZT2BB only. Not for NavNet TZtouch or NavNet 3D.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Ethernet Cable - 1.8M - M12 to RJ45 for NEP-3The Navico Ethernet Extension cable measures 1.8M and is designed for M12 to RJ45 connections for the NEP-3.

NMEA 2000 - 2M CableNMEA 2000 Micro-C Medium duty cable. 2M (6.5 ft) Low loss 18 gauge cable recommended for network backbone runs. Specifications: Type: Cables Box Dimensions: 1"H x 7"W x 13"L WT: 0.65 lbs UPC: 9420024171332

Front Mounting Kit for Axiom 9Front Mounting Kit for Axiom 9 (A80500) by Raymarine. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology, it will meet your needs and deliver great quality at an affordable...