Marine Navigation & Instruments - NMEA Cables & Sensors

PRO NMEA 0183 MultiplexerEight OPTO-isolated inputs and six ISO-Drive™isolated outputs. Offering device protection and excellent flexibility, all in one product.Introducing the Actisense® PRO-MUX-2, the intelligent, type-approved PRO range multiplexer.The PRO-MUX-2 is rugged, with a stainless steel housing, and provides isolation on all inputs and...

PRO NMEA 0183 Buffer - 2 OPTO Inputs, 12 ISO-Drive Outputs, Serial Port, Ethernet Port, Pluggable Screw TerminalTwo OPTO-isolated inputs and twelve ISO-Drive™ isolated outputs. Offering device protection and excellent flexibility, all in one product - the Actisense® PRO-BUF-2, the intelligent, type-approved PRO range...

A2K-TDC-3M NMEA2000 Micro Cable Assembly - 3MAvailable in various lengths, the cable assemblies can be used as either a drop cable from a NMEA 2000 backbone or to extend the length of the backbone cable.Actisense Lite cable assemblies allow quick installation and come with...

NMEA2000 Micro Terminator - MaleActisense terminators are exceptionally robust, designed to withstand the harsh conditions of the marine environment, and are easy to install.Each NMEA 2000 installation must have precisely two termination resistors installed, one at each end of the backbone, to ensure proper...

NMEA2000 Smart Universal Micro TerminatorTerminate your NMEA 2000 network – regardless of whether a male or female connection is required – and use the TER-U’s smart functionality to easily diagnose any power or voltage issues on your NMEA 2000 bus.The TER-U can be fitted...

NMEA2000 Micro 4-Way DropReduce your NMEA 2000 cabling requirements, saving time, space and money.The Actisense 4-way drop makes it easier to reach up to four devices with a single cable.Typically, when four devices need to be connected to an NMEA 2000 backbone, a T-piece...

NMEA 2000 Right Angle AdapterThe NMEA 2000 right-angle adapter is a compact solution for tight installations where standard straight connectors won’t fit. With a 90-degree design, it reduces cable strain and allows for a clean, low-profile connection to your NMEA 2000 network backbone or...

NMEA 2000 Power IsolatorThe NMEA 2000 power isolator is designed to safely separate power between two segments of an NMEA 2000 network while still allowing data to pass through uninterrupted. This is essential when integrating networks with multiple power sources or when isolating a...

NMEA 2000 Drop Cable - 5 MeterThis NMEA 2000 5-pin drop cable is built for seamless integration between your network backbone and connected marine electronics. Designed with durable, waterproof connectors, it ensures a secure and interference-free connection to displays, GPS units, sensors, and more....

NMEA 2000 Non-Fused Power Cable - 2 MeterThis NMEA 2000 power cable (no fuse) is designed to deliver clean, reliable power to your NMEA 2000 network. Featuring a 5-pin molded connector on one end and stripped wire leads on the other, it allows for...

NMEA 2000 2-Way T-ConnectorOur NMEA 2000 T-Connector makes it easy to expand your marine electronics network by providing secure connection points between backbone cables and connected devices. Built to NMEA 2000 standards, each NMEA T-connector features rugged, waterproof 5-pin connectors for reliable data transmission...

NMEA 2000 Drop Cable - 4 MeterThis NMEA 2000 5-pin drop cable is built for seamless integration between your network backbone and connected marine electronics. Designed with durable, waterproof connectors, it ensures a secure and interference-free connection to displays, GPS units, sensors, and more....

NMEA 2000 Right Angle Cable - 2 MeterThe NMEA 2000 right-angle drop cable is designed to save space and simplify installations in tight or crowded areas. With a 90-degree molded 5-pin connector on one end, this cable provides a clean, low-profile connection to your...

NMEA 2000 Drop Cable - 2 MeterThis NMEA 2000 5-pin drop cable is built for seamless integration between your network backbone and connected marine electronics. Designed with durable, waterproof connectors, it ensures a secure and interference-free connection to displays, GPS units, sensors, and more....

NMEA 2000 5 Pin Female Strip Cable - 0.5 MeterOur NMEA 2000 strip cables provide a reliable way to connect bare wire leads directly into an NMEA 2000 network. Available in both male and female configurations, each cable features a 5-pin molded connector on...

NMEA 2000 Drop Cable - 10 MeterThis NMEA 2000 5-pin drop cable is built for seamless integration between your network backbone and connected marine electronics. Designed with durable, waterproof connectors, it ensures a secure and interference-free connection to displays, GPS units, sensors, and more....

The Micro Elbow is used in spots where it is impossible to bend a cordset around tight corners. The elbow easily connects to a tee or double-ended cordsets making 90 degree turns practical at the end or anywhere along the line. Mounting hole for...

Maretron's TMP100 measures the temperature for up to 6 temperature probes and reports the information over an NMEA 2000 network. The TMP100 supports up to 4 thermistor probes and 2 high temperature thermocouple probes. Optional thermistor probes (-20 deg. C to 80 deg. C...

Mini Field-Attachable ConnectorsField-attachable connections allow you to make field connections to bulk cable. The color-coded screw terminals match the individual wire colors found within the bulk cables for error-free field installationColor-coded screw terminators make for error-free field installation Rugged housing material designed to withstand...

Mechanical Contact Carrier Mat/Color: Thermoplastic PUR/Blue-Gray Molded Body Mat/Color: Thermoplastic PUR/Blue-Gray Contact Mat/Plating: Brass/Gold Coupling Nut Mat/Plating: Brass/Nickel Connector Outside Diameter: 0.59?Electrical Current Rating: 4.0 Amps Voltage Rating: 250 VCable Outer Jacket Mat/Color: PVC/Gray Conductor Insulation Material: HDPE (data pair), SRPVC (power pair) Number...