Electrical - Alternators

Zeus 24V 4kW Low Turn On (LTO) 3.15 Alternator with Isolated Ground (Common Rail)The ARCO Zeus 24v 4kW LTO alternator turns on at lower RPMs, runs cooler, and provides more power than older designs that are larger and heavier. This alternator continuously generates over...

Alternator 1-2" Single Foot Dual V Pulley Regulator & Temp Sensor - 170A Kit - 12VBalmar offers a wide range of alternator power upgrades designed specifically for marine industry applications. Balmar installs high-reliability bearings, robust rectifier diodes, and improved heat-sinking capabilities on all our...

Premium Replacement Alternator with Single-Groove Pulley - 12V, 70AReplacement alternator that will fit Mercruiser 3.0L, 1999-Up, 12 Volt, 70 AMP, Internal Fan, Single groove pulley included. Features: All alternators are engineered for performance and reliability All alternators are engineered and manufactured with precision and quality...

Regulator Kit for Valeo with MC-618Balmar's MC-618 Regulator communicates with the SG200 Battery Monitor to provide information to the SG200 Color Display and Smartphone App.  Now you can see how the MC-618 Regulator is directing your onboard charging activity from either the SG200 2"...

Pulley Kit for Yanmar 4JH3-TE, 4JH3-HTEAltMount®Serpentine Pulley Conversion Kit for Yanmar Diesel EnginesYanmar Engines Covered: 4JH3, -TE, -THEKit Includes: Three Ten-Groove (J10) Pulleys, Two J10, 48″ Circumference Serpentine Belts (one spare) & Mounting HardwareNote: If you specify an AT-200A Alternator, a longer belt length...

Pulley Kit, Yanmar 4JH4-HTE-TE-DTEThe AltMount® Serpentine Pulley Conversion Kit provides an easily installed solution to provide greater load transfer and reduce engine noise and vibration. While the installation process for this kit is moderately simple, Balmar strongly recommends reading and following the installation instructions...

Temperature Sensor Alternator - 80" LengthIntended for longer runs when the standard 54" Alternator Temp Sensor (PN: MC-TS-A) is insufficient.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Alternator 120 Amp 12V 1-2" Single Foot Single K6 Pulley with Isolated GroundingAlternator, 621 Series, 120A, 12V, Spindle Mount (Single Foot), 1-2in, K6 Serpentine Pulley, Isolated Ground 1″ Motorola-Style Mounting;  Typical for Westerbeke, Lehman, Hino & Pathfinder Engines 2″ Delco-Style Mounting;  Typical for Volvo...

Zeus 24V 4kW Low Turn On (LTO) Vortec Alternator with Isolated GroundThe ARCO Zeus 24v 4kW LTO alternator turns on at lower RPMs, runs cooler, and provides more power than older designs that are larger and heavier. This alternator continuously generates over 1.4kW (51...

Alternator Protection Module - 48VThe Balmar APM provides best-in-class surge protection using the latest technology developed for the automotive industry. Protect Alternators From Damaging Effects: Battery switch disconnects Lithium battery BMS disconnects Surges from solenoids, combiners, starters, and other motors. The Balmar APM excels in...

Alternator 100 AMP Kit 12V 3.15" Dual Foot Saddle Dual Pulley Regulator & Temp SensorKit Includes: a 60-100-DV Alternator, MC-618 Regulator, Temperature Sensors, Mounting Hardware60-100-DV Alternator: 100A, 12V, Saddle Mount (Dual Foot), 3.15in, Dual Deep Vee Pulley, Isolated GroundHitachi-Style Mounting; Typical for Yanmar, Westerbeke,...

Offshore Repair Kit 60 Series 12V with Bearings, Brushes, Regulator/RectifierOffshore Repair Kit, 60 Series Alternators, 12VKit Includes: Regulator Brush Holder Assembly Rear Bearing  Regulator Washer  Rectifier Assembly  Rectifier Gasket  Front Bearing  Instruction Sheet This product may not be returned to the original point of...

Premium Replacement Outboard Alternator - Verado 12V 70AReplacement alternator that will fit all Mercury Verado Outboards, 12 Volt, 70 AMP, internal fan, multi-groove serpentine pulley included.Features: All alternators are engineered for performance and reliability All alternators are engineered and manufactured with precision and quality...

Pulley Kit for Yanmar 2GM20-F, 3GM30-F, 3GM-FAltMount® Serpentine Pulley Conversion Kit for Yanmar Diesel EnginesYanmar Engines Covered: 3GM30-F, 3GM-FKit Includes: Three Ten-Groove (J10) Pulleys, Two J10, 40″ Circumference Serpentine Belts (one spare) & Mounting HardwareNote: If you specify an AT-200A Alternator, a longer belt length...

Alternator 170 AMP Kit 12V 3.15" Dual Foot Saddle K6 Pulley Regulator & Temp SensorKit Includes: XT-DF-170-K6 Alternator, MC-618 Regulator, Temperature Sensors & Mounting HardwareXT Series Alternator: 170A, 12V, Saddle Mount (Dual Foot), 3.15in, K6 Serpentine Pulley, Case GroundHitachi-Style Mounting; Typical for Yanmar, Westerbeke,...

Alternator Protection Module APM24 - 24VAlternators can be subjected to voltage spikes caused by lithium battery shutdowns, intermittent connections, and other over-voltage events.  Balmar has introduced a robust Alternator Protection Module which helps to protect the alternator’s diodes and internal voltage regulator against spikes...

Pulley Kit for Yanmar 4JH2-TE, 4JH2-HTE, 4JH2-DTE 4JH2-UTEAltMount®Serpentine Pulley Conversion Kit for Yanmar Diesel EnginesYanmar Engines Covered: 4JH2-TE -HTE -DTE -UTEKit Includes: Three Ten-Groove (J10) Pulleys, Two J10, 47″ Circumference Serpentine Belts (one spare) & Mounting HardwareNote: If you specify an AT-200A Alternator, a...

Alternator 250 AMP 12V 3.15" Dual Foot Saddle J10 PulleyAlternator, XT Series, 250A, 12V, Saddle Mount (Dual Foot), 3.15in, J10 AltMount Serpentine Pulley, Case GroundHitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre EnginesReplaces: AT-DF-200-12-IG, AT-DF-200-J10This product may not be returned to the original...

Alternator 120 AMP 12V 3.15" Dual Foot Saddle K6 Pulley Regulator & Temp SensorKit Includes: a 60-120-K6 Alternator, MC-618 Regulator, Temperature Sensors, Mounting Hardware60-120-DV Alternator: 120A, 12V, Saddle Mount (Dual Foot), 3.15in, K6 Serpentine Pulley, Isolated GroundHitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman &...

Belt Buddy w/o Adjustment ArmUniversal Belt Buddy Mechanism;  for use with exising adjustment armsDoes not come with the Balmar Universal Adjustment Arm (UAA).Caution:  This approach sacrifices some “travel” in the existing adjustment arm so the BBU mechanism can be anchored to the arm.  Make...